Hose Braiding Extrusion Line

Hose Braiding Extrusion Line

Hose Braiding Extrusion Line

Consisting of

  • 1 x Spiraltex 48 bobins (24x2) braiding machine

Used for hose reinforcement for braid hoses (Coolant water and Turbo charged Air) from 7mm ID to 80 mm ID.

  • 1 x Haul Off
  • 1 x 90mm Andouart Extruder

Two XHeads available for either small bore or large bore

Ratio is 12D and the feed roll is a new one (1992).

Currently used use as a Xhead for the second layer on the braided greenstock

Normal wear Screw: from 89.4 mm to 88 at the Head end Feed Barrel:  90.1 mm Medium Barrel:   90.4 mm Head Barrel: 90.9 mm

Mainly EPDM but also Chloroprene, NBR and NBR/PVC

  • 1 x Caterpillar
  • 1 x Hot Air Tunnel (3 metres)
  • 1 x Rewind machine

Used produce coolant hoses with polyester reinforcement for Trucks